Jaguar Land Rover upcycles aluminium to cut carbon emissions by a quarter

Katie Hill - Editor-in-Chief, My Green Pod

Home » Reality project

Published: 24 August 2020

This Article was Written by: Katie Hill - My Green Pod

Tags , , ,

Research by Jaguar Land Rover has revealed how an innovative recycling process could upcycle aluminium waste from drinks cans, bottle tops and end-of-life vehicles into the premium cars of the future and reduce production CO2 emissions by up to 26%.

The Reality aluminium project is a key part of Jaguar Land Rover’s Destination Zero mission to reduce carbon emissions and its ambition ‘to make societies safer and environments cleaner’ through innovation.

Engineers were able to use the recycled aluminium and mix it with a lower amount of primary aluminium to form a new and tested prototype alloy, comparable with the existing Jaguar Land Rover grade and quality.

Analysis of the recycling and manufacturing process revealed it has the potential to reduce alloy production CO2 emissions by up to 26% compared with the current automotive grade, helping Jaguar Land Rover further close the loop on its manufacturing and use of raw materials.

Recycling aluminium

Aluminium is one of the most widely recycled materials in the world and can be melted down and reformed repeatedly without losing quality.

Post-consumer recycled aluminium appears in everyday goods such as drinks cans, aerosols, foil food trays and bottle tops – but it’s not widely used for high-end applications such as automotive manufacturing.

Nearly 75% of all aluminium produced in the USA and EU is still in use today, and the creation of recycled aluminium uses around 90% less energy than raw material production.

New tech for upcycling

By recovering the high-quality automotive-grade aluminium used to manufacture vehicles, Jaguar Land Rover can re-use the premium properties as part of a blend, reducing the need for virgin aluminium in vehicle production.

Typically, end-of-life vehicle scrap is exported overseas where it can be reused for low-end applications, but new advanced separation technology has enabled it to be upcycled back into the automotive process, helping close the loop and reduce the environmental impact.

‘This project has allowed us, for the first time, to recover premium automotive-grade aluminium from scrapped vehicles and reuse its unique properties. The potential of this on the production process is a reduction in CO2 impact as well as helping us reuse even more aluminium. 

‘As we move into an autonomous, connected and electrified future, with the potential of shared fleets being de-commissioned en masse, it could allow Jaguar Land Rover to engineer this closed-loop recycling alloy into tight production schedules to further improve efficiency and environmental benefits.’

GAËLLE GUILLAUME
Lead project manager for Reality at Jaguar Land Rover

Destination Zero

The £2m project, co-funded by Innovate UK and in partnership with Brunel University, is helping Jaguar Land Rover extend its aluminium closed-loop and recycling initiatives as part of Destination Zero.

Jaguar Land Rover has already reduced its global operating CO2 emissions per vehicle by 50.7% since 2007 and remains committed to an ongoing decarbonisation process.

Between September 2013 and March 2020, around 360,000 tonnes of closed-loop scrap have been processed back into the brand’s lightweight aluminium intensive architecture, across all vehicle lines including the Jaguar XE.

Here's More
Related Content 👇

More Ethical
Transport
News & Features